74AHCT244-Q100 Datasheet – Octal Buffer / Line Driver IC

319 views

Overview

The 74AHC244-Q100; 74AHCT244-Q100 is a high-speed Si-gate CMOS device.

The 74AHC244-Q100; 74AHCT244-Q100 have octal non-inverting buffer/line drivers with 3-state outputs. The 3-state outputs are controlled by the output enable inputs (nOE)’. A HIGH on nOE’ causes the outputs to assume a high-impedance OFF state.

This product has been qualified for the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.

Part Number74AHCT244-Q100, 74AHCT244-Q100
FunctionOctal buffer/line driver; 3-state
Package20 pin SOIC
ManufacturerNXP
DatasheetDownload PDF AM5890S pdf

74AHCT244 Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1)
    • Specified from -40 °C to +85 °C and from -40 °C to +125 °C
  • Balanced propagation delays
  • All inputs have a Schmitt trigger action
  • Inputs accept voltages higher than VCC
  • For 74AHC244-Q100 only: operates with CMOS input levels
  • For 74AHCT244-Q100 only: operates with TTL input levels
  • ESD protection:
    • MIL-STD-883, method 3015 exceeds 2000 V
    • HBM JESD22-A114F exceeds 2000 V
    • MM JESD22-A115-A exceeds 200 V (C = 200 pf, R = 0 W)
  • Multiple package options

Recommended Operating Condition

Voltages are referenced to GND (ground = 0 V).

SymbolParameterConditions74AHC244-Q10074AHCT244-Q100Unit
MinTypMaxMinTypMax
VCCsupply voltage 2.05.05.54.55.05.5V
VIinput voltage 05.505.5V
VOoutput voltage 0VCC0VCCV
Tambambient temperature -40+25+125-40+25+125°C
Dt/DVinput transition riseVCC = 3.3 V ± 0.3 V100ns/V
and fall rate                      VCC = 5.0 V ± 0.5 V2020ns/V
  • [1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
  • [2] Ptot derates linearly with 8 mW/K above 70C.
  • [3] Ptot derates linearly with 5.5 mW/K above 60C.
  • [4] Ptot derates linearly with 4.5 mW/K above 60C.

74AHCT244 Pinout

Pin Definitions

SymbolPinDescription
1OE, 2OE1, 19output enable input (active LOW)
1A[0:3]2, 4, 6, 8data input
2A[0:3]17, 15, 13, 11data input
1Y[0:3]18, 16, 14, 12data output
2Y[0:3]3, 5, 7, 9data output
GND10ground (0 V)
VCC20supply voltage

Applications

  • Signal buffering
  • Level shifting
  • Bus drivers
  • Data communication
  • Industrial control systems
  • Automotive electronics

74AHCT244 Datasheet

Download the 74AHCT244 IC Datasheet from the link given below.