Overview
The MC74HC76 is identical in pinout to the LS76. The device inputs are compatible with Standard CMOS outputs; with pullup resistors, they are compatible with LSTTL outputs. Each flip±flop is negative±edge clocked and has active±low asynchronous Set and Reset inputs. The HC76 is identical in function to the HC112 but has a different pinout.
| Part Number | MC74HC76D |
| Function | Dual JK Flip-Flop with Set and Reset |
| Package | DIP, SOIC 16 Pin Type |
| Manufacturer | Motorola (Freescale) |
| Datasheet | Download PDF  |
MC74HC76D Features
- Output Drive Capability: 10 LSTTL Loads
- Outputs Directly Interface to CMOS, NMOS, and TTL
- Operating Voltage Range: 2 to 6V
- Low Input Current: 1mA
- High Noise Immunity Characteristic of CMOS Devices
- In Compliance With the JEDEC Standard No. 7A Requirements
- Chip Complexity: 100 FETs or 25 Equivalent Gates
Maximum Ratings
| Symbol | Parameter | Value | Unit |
| VCC | DC Supply Voltage (Referenced to GND) | – 0.5 to + 7.0 | V |
| Vin | DC Input Voltage (Referenced to GND) | – 0.5 to VCC + 0.5 | V |
| Vout | DC Output Voltage (Referenced to GND) | – 0.5 to VCC + 0.5 | V |
| Iin | DC Input Current, per Pin | ± 20 | mA |
| Iout | DC Output Current, per Pin | ± 25 | mA |
| ICC | DC Supply Current, VCC and GND Pins | ± 50 | mA |
| PD | Power Dissipation in Still Air Plastic DIP† SOIC Package† | 750 500 | mW |
| Tstg | Storage Temperature Range | – 65 to + 150 | C |
| TL | Lead Temperature, 1 mm from Case for 10 Seconds Plastic DIP or SOIC Package | 260 | C |
MC74HC76D Pinout
Applications
- Digital logic circuits
- Sequential circuit design
- Clock pulse generation
- Binary data storage
- State machine implementation
MC74HC76D Datasheet
Download the MC74HC76D IC Datasheet from the link given below.
