The TEC1-12710 40x40mm Thermoelectric Cooler 10A Peltier Module is the straightforward utilization of the Peltier Thermoelectric Effect. The Thermoelectric cooling module highlights 127 semiconductor couples in the space of 40mmx40mm. Thermoelectric coolers otherwise called TEC or Peltier Module make a temperature differential on each side. One side gets hot and the opposite side gets cool. Consequently, they can be utilized to either warm something up or chill something off, contingent upon which side you use. You can likewise exploit a temperature differential to create power.
This 12V Peltier Module functions admirably as long as you eliminate the heat from the hot side. In the wake of turning on the gadget, the hot side will heat rapidly, the virus side will cool rapidly. In the event that you don’t eliminate the heat from the hot side (with a heat sink or other gadget), the Peltier will rapidly arrive at balance and sit idle. We suggest utilizing an old PC CPU heatsink or another water block of metal to pull heat from the hot side. We had the option to utilize a PC power supply and CPU heatsink to make the virus side so awkward we were unable to expect our finger to remember.
Features of Thermoelectric Cooler Peltier TEC1-12710
- Ceramics thermoelectric Cooler semiconductor module TEC1-12710
- No need to move internal parts when in transit
- Easy transition between the hot side to the cool side and vice-versa just by reversing the polarity of the supply.
- Quality tested cooling cells.
- Solid-state, vibration-free, noise-free.
- Simple to install and operate.
- Should use with a heat sink.
- It can be used in the refrigerator, Portable cooling car box, Liquid Cooling, Temperature stabilizer, etc.
Specification of Thermoelectric Cooler Peltier TEC1-12710
| Model: | TEC1-12710 |
| Dimension: | 40*40*3.4mm |
| Internal resistance: | 1.2~1.5 ohm (ambient temperature 23 – 1 DEG C, 1kHZ Ac) |
| Maximum temperature: | Tmax (Qc=0) 60 DEG C. |
| Operating current: | Imax=10A (15Vmax voltage start) |
| Rated voltage: | DC12V (Vmax:15.5V) |
| Cooling power: | Qcmax 92W |
| Assembly pressure: | 85N/cm2 |
| Working environment: | the temperature range of -55 degrees C ~ 83 C (high ambient temperature will directly affect the efficiency of the cooling) |
| Wire specification: | lead length 300 + RV 5mm standard wire single head 5mm tin plating |
Applications of TEC1-12710
When coupled with an appropriate heat sink and power source, TEC1 Peltier Modules are suitable for the following applications…
- Liquid Component Cooling -Ideal for performance PC applications, TEC1 Peltier Modules are tested to cool CPUs and GPUs to extreme temperatures when used in conjunction with 12v PSU rails and optimized CPU heat sinks.
- Food and Beverage Refrigeration – Precision temperature management allows for use in temperature-sensitive food and beverage refrigeration applications requiring exacting cooling (or heating).
- Commercial Portable Cooling – Approved for use in commercial transport, TEC1 Peltier Modules can be applied to manage DTmax temperatures of up to 68˚C.
- Temperature Stabilization – Stabilize volatile temperatures with ease and superior energy efficiency when paired with a precision Peltier control module.
- Precision Temperature Control – For research laboratories, universities, or any precision temperature control situation with a range of up to 68˚C, TEC1 Peltiers provide unparalleled control.
- Medical and Photonic Systems – Trusted in thousands of medical and photonic systems applications, TEC1 Peltier Modules offer premier precision temperature control – even in extreme temperature differentials – few coolers can match.
