Skip to content

1200AP40 Datasheet – PWM Current-Mode Controller

PWM Current-Mode Controller for Universal Off-Line Supplies Featuring Low Standby Power

Published Updated 44 views Report an error
Package SOIC 8 Pin, DIP 8 Pin Type
1200AP40-IC

1200AP40 overview

The 1200AP40 is a PWM Current-Mode Controller for Universal Off-Line Supplies Featuring Low Standby Power made by ON Semiconductor, supplied in these packages: SOIC 8 Pin, DIP 8 Pin Type. The absolute maximum ratings table on this page lists the 10 limits from the manufacturer's datasheet that must not be exceeded. This page brings together the 1200AP40 pinout and maximum ratings, with the full datasheet PDF to preview below or download.

Housed in SOIC−8 or PDIP−8 package, the NCP1200A enhances the previous NCP1200 series by offering a reduced optocoupler current together with an increased drive capability. Due to its novel concept, the circuit allows the implementation of complete off−line AC−DC adapters, battery charger or a SMPS where standby power is a key parameter.

With an internal structure operating at a fixed 40 kHz, 60 kHz or 100 kHz, the controller supplies itself from the high−voltage rail, avoiding the need of an auxiliary winding. This feature naturally eases the designer task in battery charger applications. Finally, current−mode control provides an excellent audio−susceptibility and inherent pulse−by−pulse control.

When the current setpoint falls below a given value, e.g. the output power demand diminishes, the IC automatically enters the so−called skip cycle mode and provides excellent efficiency at light loads. Because this occurs at a user adjustable low peak current, no acoustic noise takes place.

Datasheet

1200ap40-datasheet.pdf
Format PDFSize 179 KBLanguage ENRevision Rev. 5
Third-party / unverified source

1200AP40 features

  • Pb−Free Packages are Available
  • No Auxiliary Winding Operation
  • Auto−Recovery Internal Output Short−Circuit Protection
  • Extremely Low No−Load Standby Power
  • Current−Mode Control with Skip−Cycle Capability
  • Internal Temperature Shutdown
  • Internal Leading Edge Blanking
  • 250 mA Peak Current Capability
  • Internally Fixed Frequency at 40 kHz, 60 kHz and 100 kHz
  • Direct Optocoupler Connection
  • SPICE Models Available for TRANsient and AC Analysis
  • Pin to Pin Compatible with NCP1200

1200AP40 pinout

1200AP40 pinout diagram
PinNameDescription
1AdjAdjust the skipping peak current
2FBSets the peak current setpoint
3CSCurrent sense input
4GNDThe IC ground
5DrvDriving pulses
6VCCSupplies the IC
7NC−
8HVGenerates the VCC from the line

Absolute maximum ratings

ParameterSymbolValueUnit
Power Supply VoltageVCC16V
Thermal Resistance Junction−to−Air, PDIP−8 Version Thermal Resistance Junction−to−Air, SOIC VersionRθJA RθJA100 178C/WC/W
Maximum Junction TemperatureTJ(max)150°C
Temperature Shutdown−145°C
Storage Temperature Range−−60 to +150°C
ESD Capability, HBM Model (All pins except VCC and HV)−2.0kV
ESD Capability, Machine Model−200V
Maximum Voltage on Pin 8 (HV), Pin 6 (VCC) Grounded−450V
Maximum Voltage on Pin 8 (HV), Pin 6 (VCC) Decoupled to Ground with 10 µF−500V
Minimum Operating Voltage on Pin 8 (HV)−40V

1200AP40 applications

  • AC−DC Adapters for Portable Devices
  • Offline Battery Chargers
  • Auxiliary Power Supplies (USB, Appliances, TVs, etc.)

1200AP40 datasheet PDF preview

PDF · 179 KB

Comments 0

Leave a comment