Skip to content

24C64WP Datasheet – 64 Kbit Serial I2C Bus EEPROM

Published Updated 47 views Report an error
Package SOP 8 Pin Type
24C64WP-IC

24C64WP overview

The 24C64WP is a 64-Kbit serial I2C bus EEPROM made by STMicroelectronics, supplied in an SOP 8 Pin Type package. The absolute maximum ratings table on this page lists the 8 limits from the manufacturer's datasheet that must not be exceeded. This page brings together the 24C64WP pinout and maximum ratings, with the full datasheet PDF to preview below or download.

The M24C64 is a 64-Kbit I2C-compatible EEPROM (Electrically Erasable PROgrammable Memory) organized as 8 K × 8 bits.

Over an ambient temperature range of -40 °C / +85 °C, the M24C64-W can operate with a supply voltage from 2.5 V to 5.5 V, the M24C64-R can operate with a supply voltage from

1.8 V to 5.5 V, and the M24C64-F and M24C64-DF can operate with a supply voltage from

1.7 V to 5.5 V ( the M24C64-F can also operate down to 1.6 V, under some restricting conditions). The M24C64-D offers an additional page, named the Identification Page (32 byte). The Identification Page can be used to store sensitive application parameters which can be (later) permanently locked in Read-only mode.

Datasheet

24c64wp-datasheet.pdf
Format PDFSize 951 KBLanguage ENRevision Rev. 36
Third-party / unverified source

24C64WP features

  • Compatible with all I2C bus modes:1 MHz400 kHz 100 kHz
  • 1 MHz400 kHz
  • 100 kHz
  • Memory array:64 K
  • bit (8 Kbyte) of EEPROM
  • Page size: 32 byte
  • Additional Write lockable page (M24C64-D order codes)
  • Single supply voltage: – 1.7 V to 5.5 V over –40 °C / +85 °C – 1.6 V to 5.5 V over 0 °C / +85 °C
  • – 1.7 V to 5.5 V over –40 °C / +85 °C
  • – 1.6 V to 5.5 V over 0 °C / +85 °C
  • Write:Byte Write within 5 ms Page Write within 5 ms
  • Byte Write within 5 ms
  • Page Write within 5 ms
  • Random and sequential Read modes
  • Write protect of the whole memory array
  • Enhanced ESD/Latch-Up protection
  • More than 4 million Write cycles More than 200-years data retention

24C64WP pinout

24C64WP pinout diagram
NameDescription
E2, E1, E0Chip Enable
SDASerial Data
SCLSerial Clock
WCWrite Control
VCCSupply voltage
VSSGround

Absolute maximum ratings

ParameterSymbolValueUnit
Ambient operating temperatureMin. -40 / Max. 130°C
Storage temperatureTSTGMin. –65 / Max. 150°C
Lead temperature during solderingTLEADMin. see note (1) / Max. °C
-PDIP-specific lead temperature during solderingMin. 260(2) / Max. °C
DC output current (SDA = 0)IOLMax. 5mA
Input or output rangeVIOMin. –0.50 / Max. 6.5V
Supply voltageVCCMin. –0.50 / Max. 6.5V
Electrostatic pulse (Human Body model)(3)VESDMax. 3000(4)V

24C64WP applications

  • I2C EEPROM Memory
  • Data Storage and Retrieval
  • Microcontroller Program Storage
  • Firmware Updates
  • Embedded Systems

24C64WP datasheet PDF preview

PDF · 951 KB

Comments 0

Leave a comment