25Q32BSIG Datasheet – 32M-bit Serial Flash Memory
Package SOP / DIP 8 Pin Type
25Q32BSIG overview
The 25Q32BSIG is a 32M-bit Serial Flash Memory made by GigaDevice, supplied in an SOP / DIP 8 Pin Type package. The absolute maximum ratings table on this page lists the 5 limits from the manufacturer's datasheet that must not be exceeded. This page brings together the 25Q32BSIG pinout and maximum ratings.
The GD25Q32B (32M-bit) Serial flash supports the standard Serial Peripheral Interface (SPI), and supports the Dual/Quad SPI: Serial Clock, Chip Select, Serial Data I/O0 (SI), I/O1 (SO), I/O2 (WP#), and I/O3 (HOLD#). The Dual I/O data is transferred with speed of 240Mbits/s and the Quad I/O & Quad output data is transferred with speed of 480Mbits/s.
Datasheet
Component datasheet
Size 1.1 MB
Third-party / unverified source
25Q32BSIG features
- 32M-bit Serial Flash 4096K-byte -256 bytes per programmable page
- 4096K-byte
- -256 bytes per programmable page
- Standard, Dual, Quad SPI
- Standard SPI: SCLK, CS#, SI, SO, WP#, HOLD#
- Dual SPI: SCLK, CS#, IO0, IO1, WP#, HOLD#
- Quad SPI: SCLK, CS#, IO0, IO1, IO2, IO3
- High Speed Clock Frequency
- 120MHz for fast read with 30PF load
- Dual I/O Data transfer up to 240Mbits/s
- Quad I/O Data transfer up to 480Mbits/s
- Software/Hardware Write Protection
- Write protect all/portion of memory via software
- Enable/Disable protection with WP# Pin
- Top or Bottom, Sector or Block selection
- Minimum 100,000 Program/Erase Cycles
- Program/Erase Speed
- Page Program time: 0.4ms typical
- Sector Erase time: 40ms typical
- Block Erase time: 0.2/0.4s typical
- Chip Erase time: 20s typical
- Flexible Architecture Sector of 4K-byte Block of 32/64k-byte
- Sector of 4K-byte
- Block of 32/64k-byte
- Low Power Consumption 20mA maximum active current 5uA maximum power down current
- 20mA maximum active current
- 5uA maximum power down current
- Advanced security Features (1) 4*256-Byte Security Registers With OTP Lock
- 4*256-Byte Security Registers With OTP Lock
- Single Power Supply Voltage Full voltage range:2.7~3.6V
- Full voltage range:2.7~3.6V
25Q32BSIG pinout
Absolute maximum ratings
| Parameter | Value | Unit |
|---|---|---|
| Ambient Operating Temperature | -40 to 85 | ℃ |
| Storage Temperature | -65 to 150 | ℃ |
| Output Short Circuit Current | 200 | mA |
| Applied Input/Output Voltage | -0.5 to 4.0 | V |
| VCC | -0.5 to 4.0 | V |
25Q32BSIG applications
- Automotive Electronics
- Industrial Automation
- Networking Equipment
- IoT Devices

Comments 0
Leave a comment