AP6330 Datasheet – WiFi+Bluetooth 4.0 (HS)+FM Rx IC
WiFi+Bluetooth 4.0 ( HS ) + FM Rx Module
AP6330 overview
AMPAK Technology would like to announce a low-cost and low-power consumption module which has all of the WiFi, Bluetooth and FM functionalities. The highly integrated module makes the possibilities of web browsing, VoIP, Bluetooth headsets, FM radio functional applications and other applications. With seamless roaming capabilities and advanced security, also could interact with different vendors’ 802.11a/b/g/n Access Points in the wireless LAN.
The wireless module complies with IEEE 802.11 a/b/g/n standard and it can achieve up to a speed of 72.2Mbps with single stream in 802.11n draft, 54Mbps as specified in IEEE 802.11g, or 11Mbps for IEEE 802.11b to connect to the wireless LAN. The integrated module provides SDIO interface for WiFi, UART / PCM interface for Bluetooth FM.
This compact module is a total solution for a combination of WiFi + BT + FM technologies. The module is specifically developed for Smart phones and Portable devices.
Datasheet
AP6330 features
- 802.11a/b/g/n dual-band radio — non-simultaneous dual-band operation
- Bluetooth V4.0(HS) with integrated Class 1 PA and Low Energy (BLE) support
- Concurrent Bluetooth, FM (RX) RDS/RBDS, and WLAN operation
- Simultaneous BT/WLAN receive with single antenna
- WLAN host interface options: SDIO v2.0 — up to 50 MHz clock rate
- SDIO v2.0 — up to 50 MHz clock rate
- BT host digital interface: UART (up to 4 Mbps)
- UART (up to 4 Mbps)
- FM multiple audio routing options: PCM, eSCO, A2DP
- IEEE Co-existence technologies are integrated die solution
- ECI — enhanced coexistence support, ability to coordinate BT SCO transmissions around WLAN receives
AP6330 pinout
| Pin | Name | Description |
|---|---|---|
| 1 | GND | Ground connections |
| 2 | WL_BT_ANT | RF I/O port |
| 3 | GND | Ground connections |
| 4 | FM_RX | FM radio RF input antenna port |
| 5 | NC | Floating (Don’t connected to ground) |
| 6 | BT_WAKE | HOST wake-up Bluetooth device |
| 7 | BT_HOST_WAKE | Bluetooth device to wake-up HOST |
| 8 | NC | Floating (Don’t connected to ground) |
| 9 | VBAT | Main power voltage source input |
| 10 | XTAL_IN | Crystal input |
| 11 | XTAL_OUT | Crystal output |
| 12 | WL_REG_ON | Internal regulators power enable/disable |
| 13 | WL_HOST_WAKE | WLAN to wake-up HOST |
AP6330 applications
- Wi-Fi Modules
- Internet of Things (IoT) Devices
- Smartphones and Tablets
- Embedded Systems
Comments 0
Leave a comment