AP6335 Datasheet – WIFI + Bluetooth 4.0(HS)+FM Rx Module
AP6335 overview
AMPAK Technology would like to announce a low-cost and low-power consumption module which has all of the Wi-Fi, Bluetooth and FM functionalities. The highly integrated module makes the possibilities of web browsing, VoIP, Bluetooth headsets, FM radio functional applications and other applications. With seamless roaming capabilities and advanced security, also could interact with different vendors’ 802.11a/b/g/n/ac Access Points in the wireless LAN.
The wireless module complies with IEEE 802.11 a/b/g/n/ac standard and it can achieve up
to a speed of 433.3Mbps with single stream in 802.11ac draft to connect to the wireless LAN. The integrated module provides SDIO interface for Wi-Fi, UART / PCM interface for Bluetooth FM. This compact module is a total solution for a combination of Wi-Fi + BT + FM technologies. The module is specifically developed for Smart phones and Portable devices.
Datasheet
AP6335 features
- IEEE 802.11a/b/g/n/ac dual-band radio with virtual-simultaneous dual-band operation
- Single-stream spatial multiplexing up to 433.3 Mbps data rate.
- Supports 20, 40, 80 MHz channels with optional SGI(256 QAM modulation)
- Bluetooth V4.0+EDR with integrated Class 1 PA and Low Energy (BLE) support
- Concurrent Bluetooth, FM (RX) RDS/RBDS, and WLAN operation
- Simultaneous BT/WLAN receive with single antenna
- Supports standard SDIO v3.0 and backward compatible with SDIO v2.0 host interfaces. SDIO v3.0(4-bit) — up to 208 MHz clock rate in SDR104 mode
- SDIO v3.0(4-bit) — up to 208 MHz clock rate in SDR104 mode
- BT host digital interface: UART (up to 4 Mbps)
- UART (up to 4 Mbps)
- FM multiple audio routing options: PCM, eSCO, A2DP
- IEEE Co-existence technologies are integrated die solution
- ECI — enhanced coexistence support, ability to coordinate BT SCO transmissions around WLAN receives
AP6335 pinout
| Pin | Name | Description |
|---|---|---|
| 1 | GND | Ground connections |
| 2 | WL_BT_ANT | RF I/O port |
| 3 | GND | Ground connections |
| 4 | FM_RX | FM radio RF input antenna port |
| 5 | NC | Floating (Don’t connected to ground) |
| 6 | BT_WAKE | HOST wake-up Bluetooth device |
| 7 | BT_HOST_WAKE | Bluetooth device to wake-up HOST |
| 8 | NC | Floating (Don’t connected to ground) |
| 9 | VBAT | Main power voltage source input |
| 10 | XTAL_IN | Crystal input |
| 11 | XTAL_OUT | Crystal output |
| 12 | WL_REG_ON | Power up/down internal regulators used by WiFi section |
| 13 | WL_HOST_WAKE | WLAN to wake-up HOST |
AP6335 applications
- Wi-Fi Connectivity
- Bluetooth Connectivity
- Mobile Devices
- Smartphones and Tablets
- Laptops and Notebooks
Comments 0
Leave a comment