Skip to content

ATA2069 Datasheet – Flasher with Trailer Control IC

Published Updated 36 views Report an error
Package SOP 8 Pin Type
ATA2069-IC

ATA2069 overview

The ATA2069 is a Flasher with Trailer Control IC made by Atmel Corporation, supplied in an SOP 8 Pin Type package. The absolute maximum ratings table on this page lists the 4 limits from the manufacturer's datasheet that must not be exceeded. This page brings together the ATA2069 pinout and maximum ratings, with the full datasheet PDF to preview below or download.

bipolar integrated Atmel® circuit ATA2069 is designed for the use in relay-operated automotive flasher modules and makes it possible to detect the outage of flasher bulbs on the vehicle itself and also on a trailer.

Vehicles with a trailer hook are equipped with additional pilot lamps in the dashboard.

Atmel ATA2069 is off (i.e., the relay is deactivated) as long as the flasher switch (at contact +49a) is open. As soon as this switch is closed, the IC starts reliably with the bright phase.

There are two thresholds integrated: one threshold is defined to be 21 + 10W and is designed for the lamp outage detection of 1 of 2 lamps. If the current is below this threshold, the IC switches to frequency doubling, just like the standard flashers (e.g. Atmel U2043B).

The other threshold is defined to be 42 + 10W and is designed for the outage detection of 1 of 3 lamps; if this happens, the additional trailer pilot lamp is switched off, but there is no frequency doubling. 50 ms after the start of the bright phase, the comparator measures the voltage drop at the shunt and latches this value for the rest of the bright phase. The output of this pilot lamp (pin 8) is short-circuit protected against GND. In case of a short circuit the external transistor is switched off after 52ms for the rest of the current flasher cycle, but it is enabled again for the next cycle.

Datasheet

ata2069-datasheet-2.pdf
Format PDFSize 109 KBLanguage EN
Third-party / unverified source

ATA2069 features

  • Lamp Outage Indication for Car and Trailer
  • Temperature and Supply Voltage Compensated Flashing Frequency
  • Relay Driver Output with High Current Carrying Capacity and Low Saturation Voltage
  • Minimum Lamp Load for Flasher Operation > 10W

ATA2069 pinout

ATA2069 pinout diagram
PinNameDescription
1GNDIC ground
2VSSupply Voltage
3RELRelay driver
4LDLamp failure detection
5OSCCCap. oscillator
6OSCRRes. oscillator
7SIStart input (49a)
8OPLOutput pilot lamp

Absolute maximum ratings

ParameterSymbolValueUnit
Junction temperatureTJValue 150°C
Ambient temperature rangeTambValue –40 to +95°C
Storage temperature rangeTstgValue –55 to +150°C
Thermal resistance junction ambient SO8RthjcValue 160K/W

ATA2069 applications

  • Voltage Regulation
  • Power Management
  • Consumer Electronics
  • Industrial Control

ATA2069 datasheet PDF preview

PDF · 109 KB

Comments 0

Leave a comment