DG5043 Datasheet – CMOS Analog Switch
Monolithic General Purpose CMOS Analog Switch
DG5043 overview
The DG5043 is a Monolithic General Purpose CMOS Analog Switch made by Vishay, supplied in a DIP 16 Pin Type package. The absolute maximum ratings table on this page lists the 8 limits from the manufacturer's datasheet that must not be exceeded. This page brings together the DG5043 pinout and maximum ratings, with the full datasheet PDF to preview below or download.
The DG5043 solid state analog switch is recommended for general purpose applications in instrumentation, and process control. Built on the Vishay Siliconix PLUS-40 high voltage CMOS process, this device provides ease-of-use and performance advantages to the system designer. Key performance features of the DG5043 are 1-µs switching, low power supply requirements, and break-before-make switching. Each switch conducts equally well in either direction, when on, and blocks up to 30 V peak-to-peak when off. Off leakage current is 1-nA maximum. An epitaxial layer prevents latch up. For new designs, DG403 is recommended.
Datasheet
DG5043 features
- t15-V Input Range
- On-Resistance: <50 Ω
- Break-Before-Make Switching
- TTL and CMOS Compatible
DG5043 pinout
Absolute maximum ratings
| Parameter | Value |
|---|---|
| V+ to V– | 44 V |
| GND to V– | 25V |
| VL | (GND – 0.3 V) to 44 V |
| Digital Inputsa VS, VD | (V–) –2 V to (V+ plus 2 V) or 30 mA, whichever occurs first |
| Current (Any Terminal) Continuous | 30 mA |
| Current, S or D (Pulsed 1 ms 10% duty) | 100 mA |
| Storage Temperature | 65 to 125°C |
| Power Dissipation (Package) b16-Pin Plastic DIPc | 470 mW |
DG5043 applications
- Audio Switching
- Instrumentation
- Battery Powered Systems
Comments 0
Leave a comment