HLK-PM01 3W 220V To 5V AC DC Step Down Power Supply Module
HLK-PM01 overview
Hi-Link's latest power supply module, suitable for smart home switch control devices, small volume, low current, and input voltage range, is the best choice for a smart home. Low ripple and low noise. Output overload short circuit protection function. High efficiency and power density. Low power consumption. 100% load test
Key specifications
Rated Input Voltage
100-240 V AC
Input Voltage Range
90~264 V AC
Maximum Input Current
≤ 0.2 A
Input Inrush Current
≤ 10 A
Maximum Input Voltage
≤ 270 V AC
Input Slow Start
≤ 50 mS
Input low Voltage Efficiency
Vin = 110V AC, the output full load ≥ 69 %
Input high voltage efficiency
Vin = 220VAc, the output full load ≥ 70 %
Datasheet
1909111105-hi-link-hlk-pm24-c399250.pdf
Format PDFSize 880 KBLanguage EN
Third-party / unverified source
HLK-PM01 features
- Switch Machine Overshoot: (Rated input voltage, output plus 10% load) ≤ 5% VO
- Output Over-Current Protection -- Output the maximum load of 150-200% A
- Output Short Circuit Protection.
- High Efficiency, high power Density
- The Product is designed to meet the requirements of EMC and Safety Test
HLK-PM01 specifications
| Rated Input Voltage | 100-240 V AC |
|---|---|
| Input Voltage Range | 90~264 V AC |
| Maximum Input Current | ≤ 0.2 A |
| Input Inrush Current | ≤ 10 A |
| Maximum Input Voltage | ≤ 270 V AC |
| Input Slow Start | ≤ 50 mS |
| Input low Voltage Efficiency | Vin = 110V AC, the output full load ≥ 69 % |
| Input high voltage efficiency | Vin = 220VAc, the output full load ≥ 70 % |
| Long-term reliability | MTBF ≥ 100,000 H |
| No-load-Rated Output Voltage | 5 ± 0.1 V DC |
| Full load-Rated Output Voltage | 5 ± 0.2 V DC |
| Short-time Maximum Output Current | ≥ 1000 MA |
| Long-time Maximum Output Current | ≥ 600 MA |
| Voltage Regulation | ± 0.2% |
| Load Regulation | ± 0.5% |
| Output ripple and noise | (MVP-p) ≤ 50 MV. -- Rated input voltage, output full load. With a 20MHz bandwidth oscilloscope, the load side is tested with 10uF and 0.1uF capacitors. |
Comments 0
Leave a comment