The INA193 is a Current Shunt Monitor made by Burr Brown, supplied in an SOT23-5 Pin Type package. Main ratings: LOW ERROR 3.0% Over Temp (max); BANDWIDTH Up to 500kHz; THREE TRANSFER FUNCTIONS AVAILABLE 20V/V, 50V/V, and 100V/V; QUIESCENT CURRENT 900mA (max). The absolute maximum ratings table on this page lists the 9 limits from the manufacturer's datasheet that must not be exceeded. This page brings together the INA193 pinout, key specifications and maximum ratings, with the full datasheet PDF to preview below or download.
The INA193—INA198 family of current shunt monitors with voltage output can sense drops across shunts at common-mode voltages from −16V to +36V, independent of the INA19x supply voltage. They are available with three output voltage scales: 20V/V, 50V/V, and 100V/V. The 500kHz bandwidth simplifies use in current control loops. The INA193—INA195 provide identical functions but alternative pin configurations to the INA196—INA198 (respectively).
The INA193—INA198 operate from a single +2.7V to +13.5V supply, drawing a maximum of 900mA of supply current. They are specified over the extended operating temperature range (−40°C to +125°C), and are offered in a space-saving SOT23 package
Key specifications
LOW ERROR
3.0% Over Temp (max)
BANDWIDTH
Up to 500kHz
THREE TRANSFER FUNCTIONS AVAILABLE
20V/V, 50V/V, and 100V/V
QUIESCENT CURRENT
900mA (max)
Datasheet
ina193-datasheet.pdf
Format PDFSize 226 KBLanguage ENRevision SBOS307B, rev. June 2004
Comments 0
Leave a comment