Skip to content

L2930 Datasheet – Push-Pull Four Channel Driver IC

PUSH-PULL FOUR CHANNEL DRIVER WITH DIODES

Published Updated 66 views Report an error
Package DIP 16 Pin Type
L2930-IC

L2930 overview

The L2930 is a PUSH-PULL FOUR CHANNEL DRIVER WITH DIODES made by STMicroelectronics, supplied in a DIP 16 Pin Type package. The absolute maximum ratings table on this page lists the 7 limits from the manufacturer's datasheet that must not be exceeded. This page brings together the L2930 pinout and maximum ratings, with the full datasheet PDF to preview below or download.

The Device is a monolithic integrated high volt- age, high current four channel driver designed to accept standard DTL or TTL logic levels and drive inductive loads (such as relays solenoids, DC and stepping motors) and switching power transistors.

To simplify use as two bridges each pair of chan- nels is equipped with an enable input. A separate supply input is provided for the logic, allowing op- eration at a lower voltage and internal clamp di- odes are included.

This device is suitable for use in switching applications at frequencies up to 5 kHz. The L293D is assembled in a 16 lead plastic package which has 4 center pins connected together and used for heatsinking

The L293DD is assembled in a 20 lead surface mount which has 8 center pins connected together and used for heatsinking.

Datasheet

l293d-datasheet.pdf
Format PDFSize 860 KBLanguage EN
Third-party / unverified source

L2930 features

  • 600mA OUTPUT CURRENT CAPABILITY PER CHANNEL
  • 1.2A PEAK OUTPUT CURRENT (non repetitive) PER CHANNEL
  • ENABLE FACILITY OVERTEMPERATURE PROTECTION
  • LOGICAL "0" INPUT VOLTAGE UP TO 1.5 V (HIGH NOISE IMMUNITY)
  • INTERNAL CLAMP DIODES

L2930 pinout

L2930 pinout diagram

Absolute maximum ratings

ParameterSymbolValueUnit
Supply VoltageVS36V
Logic Supply VoltageVSS36V
Input VoltageVi7V
Enable VoltageVen7V
Peak Output Current (100 ms non repetitive)Io1.2A
Total Power Dissipation at Tpins = 90 °CPtot4W
Storage and Junction TemperatureTstg, Tj– 40 to 150°C

L2930 applications

  • Motor Driver Circuits
  • Robotics Control
  • Automotive Systems
  • Industrial Automation

L2930 datasheet PDF preview

PDF · 860 KB

Comments 0

Leave a comment