Skip to content

L6598D Datasheet – Resonant Controller – STMicroelectronics

HIGH VOLTAGE RESONANT CONTROLLER

Published Updated 47 views Report an error
Package L6598 Dip 16 pin Type, L6598D SMD 16 pin Type
L6598D-IC

L6598D overview

The L6598D is an HIGH VOLTAGE RESONANT CONTROLLER made by STMicroelectronics, supplied in these packages: L6598 Dip 16 pin Type, L6598D SMD 16 pin Type. The absolute maximum ratings table on this page lists the 17 limits from the manufacturer's datasheet that must not be exceeded. This page brings together the L6598D pinout and maximum ratings, with the full datasheet PDF to preview below or download.

Datasheet

l6598-datasheet.pdf
Format PDFSize 365 KBLanguage ENRevision Rev. 8
Third-party / unverified source

L6598D features

  • High voltage rail up to 600 V
  • dV/dt immunity ±50 V/ns in full temperature range
  • Driver current capability: 250 mA source 450 mA sink
  • Switching times 80/40 ns rise/fall with 1 nF load
  • CMOS shutdown input
  • Undervoltage lockout
  • Soft-start frequency shifting timing
  • Sense op amp for closed loop control or protection features
  • High accuracy current controlled oscillator
  • Integrated bootstrap diode
  • Clamping on Vs
  • Available in DIP16 and SO16 packages

L6598D pinout

L6598D pinout diagram
PinNameDescription
1CSSSoft-start timing capacitor
2RfstartSoft-start frequency setting - low impedance voltage source -see also Cf
3CfOscillator frequency setting - see also Rfmin, Rfstart
4RfminMinimum oscillation frequency setting - low impedance voltage source - see also Cf
5OPoutSense op amp output - low impedance
6OPon-Sense op amp inverting input -high impedance
7OPon+Sense op amp non inverting input - high impedance
8EN1Half bridge latched enable
9EN2Half bridge unlatched enable
10GNDGround
11LVGLow side driver output
12VsSupply voltage with internal Zener clamp
13N.C.Not connected
14OUTHigh side driver reference
15HVGHigh side driver output
16VbootBootstrapped supply voltage

Absolute maximum ratings

ParameterSymbolValueUnit
(1) Supply current at VclIS25mA
Low side outputVLVG14.6V
High side referenceVOUT-1 to VBOOT -18V
High side outputVHVG-1 to VBOOTV
Floating supply voltageVBOOT618V
VBOOT pin slew rate (repetitive)dVBOOT/dt±50V/ns
OUT pin slew rate (repetitive)dVOUT/dt±50V/ns
Forced input voltage (pins Rfmin, Rfstart)Vir-0.3 to 5V
Forced input voltage (pins Css, Cf)Vic-0.3 to 5V
Enable input voltageVEN1, VEN2-0.3 to 5V
Enable input currentIEN1, IEN2±3mA
Sense op amp common mode rangeVopc-0.3 to 5V
Sense op amp differential mode rangeVopd-5 to 5V
Sense op amp output voltage (forced)Vopo4.6V
Storage temperatureTstg-40 to +150°C
Junction temperatureTj-40 to +150°C
Ambient temperatureTamb-40 to +125°C

L6598D applications

  • Consumer Electronics
  • Industrial Automation
  • LED Lighting
  • Motor Control
  • Battery Chargers

L6598D datasheet PDF preview

PDF · 365 KB

Comments 0

Leave a comment