LilyGO TTGO T4 ESP32 Developer Board
LilyGO TTGO T4 overview
The LilyGO TTGO T4 is an ESP32 Developer Board made by Espressif Systems, supplied in a QFN-48 package. Main ratings: Chipset ESPRESSIF-ESP32 240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessor; FLASH QSPI flash/SRAM, up to 4 x 16 MB; SRAM 520 kB SRAM , SPRAM 8M; KEY IO37,IO38,IO39. This page brings together the LilyGO TTGO T4 pinout and key specifications, with the full datasheet PDF to preview below or download.
LilyGO TTGO T4 is an ESP32-based single-board computer (SBC) with a built-in 2.2 inch TFT display. The LilyGO TTGO T4 also comes with Bluetooth and Wi-Fi connectivity, plus a microSD card reader and a 20-pin GPIO header, among a wide variety of other features. The USB to serial converter makes it easy to program, even in conjunction to an Arduino MCU board. The board has a micro USB connection with which it can be programmed and/or powered.
Key specifications
Datasheet
LilyGO TTGO T4 features
- ESP32 chip (240Mhz dual core processor)
- Flash memory: 4MB
- PSRAM: 8MB
- Built-in Wi-Fi
- Built-in Bluetooth
- Built-in 2.2 inch TFT display (ILI9341 driver)
- Built-in power management chip (IP5306) with Li-ion/Li-Po battery charging circuit (charge up to ~2A)
- USB to serial converter: CP2104 or CH9102 (drivers)
- Built-in micro SD card connection
- I2C cable included
- Battery connector: 2p Molex Picoblade
LilyGO TTGO T4 pinout
| Pin | Name | Description |
|---|---|---|
| 1 | I036 | General Purpose I/O pin 36 |
| 2 | I039 | General Purpose I/O pin 39 |
| 3 | RST | Reset Pin |
| 4 | I034 | General Purpose I/O pin 34 |
| 5 | I035 | General Purpose I/O pin 35 |
| 6 | IO32 | General Purpose I/O pin 32 |
| 7 | IO33 | General Purpose I/O pin 33 |
| 8 | IO26 | General Purpose I/O pin 26 |
| 9 | GND | Ground Pin |
| 10 | TXD | Transmitter Pin |
| 11 | IO00 | General Purpose I/O pin 0 |
| 12 | RXD | Receiver Pin |
| 13 | GND | Ground Pin |
| 14 | IO19 | General Purpose I/O pin 19 |
| 15 | IO04 | General Purpose I/O pin 4 |
| 16 | 3V3 | Chip Supply Voltage 3.3V |
| 17 | 3V3 | Chip Supply Voltage 3.3V |
| 18 | GND | Ground Pin |
| 19 | VBAT | Voltage Battery (to maintain continuous operation of the real-time clock (RTC)) |
| 20 | +5V | Chip Supply Voltage 5V |
LilyGO TTGO T4 specifications
| Chipset | ESPRESSIF-ESP32 240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessor |
|---|---|
| FLASH | QSPI flash/SRAM, up to 4 x 16 MB |
| SRAM | 520 kB SRAM , SPRAM 8M |
| KEY | IO37,IO38,IO39 |
| Dispaly | ILI9341 2.2Inch (240320) |
| USB to TTL | CP2104 |
| On-board clock | 40MHz crystal oscillator |
| Working voltage | 2.3V-3.6V |
| Working current | about 43mA |
| Sleep current | 1.1mA |
| Audio amp | ns4148 |
| Working temperature range | -40℃ ~ +85℃ |
| Size & weight | 66.70mm42.59mm*12.50mm (20.23g) |
| Charging current | 2000mA |
| Battery | 3.7V lithium battery |
| Integrated mobile power | IP5306-I2C |
| Standard | FCC/CE/TELEC/KCC/SRRC/NCC(esp32 chip) |
| Protocol | 802.11 b/g/n/e/i (802.11n,speed up to150Mbps) A-MPDU and A-MSDU polymerization,support 0.4μS Protection interval |
| Frequency range | 2.4GHz~2.5GHz (2400M~2483.5M) |
| Transmit Power | 22dBm |
| Communication distance | 300m |
| Protocol | bluetooth v4.2BR/EDR and BLE standard |
| Radio frequency | -98dBm sensitivity NZIF receiver Class-1,Class-2&Class-3 emitter AFH |
| Audio frequency | CVSD&SBC audio frequency |
| Wi-Fi Mode | Station/SoftAP/SoftAP+Station/P2P |
| Security mechanism | WPA/WPA2/WPA2-Enterprise/WPS |
| Encryption Type | AES/RSA/ECC/SHA |
| Firmware upgrade | UART download/OTA(Through network/host to download and write firmware) |
| Software Development | Support cloud server development /SDK for user firmware development |
| Networking protocol | IPv4、IPv6、SSL、TCP/UDP/HTTP/FTP/MQTT |
LilyGO TTGO T4 applications
- Shelf labels
- Industrial instrument
- IoT project design
- DIY projects
Comments 0
Leave a comment