NE5534N Datasheet – Low Noise Operational Amplifier

The NE5534N is a Dual and Single Low Noise Operational Amplifier made by Philips Electronics - NXP, supplied in a DIP 8 Pin package. Main ratings: Small-signal bandwidth 10MHz; Output drive capability 600W, 10VRMS at VS=±18V; Input noise voltage 4nV/ {Hz; DC voltage gain 100000. The absolute maximum ratings table on this page lists the 9 limits from the manufacturer's datasheet that must not be exceeded. This page brings together the NE5534N pinout, key specifications and maximum ratings, with the full datasheet PDF to preview below or download.

The 5533/5534 are dual and single high-performance low noise operational amplifiers. Compared to other operational amplifiers, such as TL083, they show better noise performance, improved output drive capability and considerably higher small-signal and power bandwidths.

This makes the devices especially suitable for application in high quality and professional audio equipment, in instrumentation and control circuits and telephone channel amplifiers. The op amps are internally compensated for gain equal to, or higher than, three. The frequency response can be optimized with an external compensation capacitor for various applications (unity gain amplifier, capacitive load, slew rate, low overshoot, etc.) If very low noise is of prime importance, it is recommended that the 5533A/5534A version be used which has guaranteed noise specifications.