Skip to content
Trademarks and datasheets are the property of their respective owners

Espressif ESP8266 Serial ESP-01 WiFi Module

Published 20,625 views
Package QFN-32
Espressif-ESP8266-Serial-ESP-01-WiFi-Module-Datasheet

Espressif ESP8266 Serial ESP-01 WiFi Module overview

Espressif ESP8266 Serial ESP-01 WiFi Module offers a user-friendly WiFi SoC (system on a chip) solution to meet the continuous demands for a power-friendly, compact and reliable solution to a vast range of issues in the IoT Industry. The Espressif ESP8266 Serial ESP-01 WiFi Module is integrated with TCP/IP protocol stack that can give any MCU access to your home, work, or industrial WiFi network.

The module can perform either as a standalone application or as a slave to a host MCU. Espressif ESP8266 Serial ESP-01 WiFi Module can be applied to any MCU design as a Wi-Fi adaptor through SPI/SDIO or UART interfaces. The ESP8266 WIFI module also features an upgraded version of Ten silica’s L106 Diamond series 32-bit processor and SoC SRAM, allowing easy interfacing with external sensors and other devices through the GPIOs.

ESP8266-ESP-01-Serial-Wireless-Transceiver-WiFi-Module

Key specifications

Power Supply
+3.3V only
Current Consumption
100mA
I/O Voltage
3.6V (max)
I/O source current
12mA (max)
Dimensions
14.3 x 24.8mm
weight
1.5g

Datasheet

0a-esp8266ex-datasheet-en.pdf
Format PDFSize 1.3 MBLanguage EN
Third-party / unverified source

Espressif ESP8266 Serial ESP-01 WiFi Module features

  • Low-cost, compact and powerful Wi-Fi Module
  • Can be used as Station or Access Point or both combined
  • Supports Deep sleep (<10uA)
  • Supports serial communication hence compatible with many development platforms like Arduino
  • Can be programmed using Arduino IDE or AT-commands or Lua Scrip
  • 802.11 b/g/n support
  • 802.11 n support (2.4 GHz), up to 72.2 Mbps
  • 2 x virtual Wi-Fi interface
  • Automatic beacon monitoring (hardware TSF)
  • Support Infrastructure BSS Station mode/SoftAP mode/Promiscuous mode

Espressif ESP8266 Serial ESP-01 WiFi Module pinout

Espressif ESP8266 Serial ESP-01 WiFi Module pinout diagram
PinNameDescription
1GroundGround Pin
2TX/GPIO-1Acts as a general purpose I/O,can also be connected to the RX pin of the programmerto upload the source program
3GPIO-2General purpose Input/output pin
4CH_ENChip Enable – Active high
5GPIO - 0General purpose Input/output pin 0
6ResetResets the module
7RX/GPIO-3General purpose Input/output pin 3
8VccChip Supply Voltage (3.3V Only)

Espressif ESP8266 Serial ESP-01 WiFi Module applications

  • Home appliances
  • Home automation
  • Smart plugs and lights
  • Industrial wireless control
  • Baby monitors
  • IP cameras
  • Sensor networks
  • Wearable electronics

More about Espressif ESP8266 Serial ESP-01 WiFi Module

Espressif ESP8266 Serial ESP-01 Specifications

  • Built-in low power 32-bit MCU @ 80MHz
  • 512kB Flash Memory
  • 8Mbit external QSPI flash memory (1MByte)
  • 32-bit Tensilica Xtensa LX106 CPU running 80MHz
  • 3.3V supply (current can spike 300mA+, depending on mode)
  • PCB-trace antenna
  • 2 x 4 dual-in-line pinout

Datasheet

See Also: 74LS138 3 to 8 Decoder/Demultiplexer | CD4059 Program Divide-by-N Counter | CD4048 CMOS Multifunction Expandable 8-Input Gate

Espressif ESP8266 Serial ESP-01 WiFi Module datasheet PDF preview

PDF · 1.3 MB

Comments 0

Leave a comment