Skip to content

SN65LVDS31-EP Datasheet – Differential Line Driver

High-Speed Differential Line Driver

Published Updated 47 views Report an error
Package SOIC 16 Pin Type
SN65LVDS31-EP-ICpng

SN65LVDS31-EP overview

The SN65LVDS31 is a differential line driver that implements the electrical characteristics of low-voltage differential signaling (LVDS). This signaling technique lowers the output voltage levels of 5-V differential standard levels (such as TIA/EIA-422B) to reduce the power, increase the switching speeds, and allow operation with a 3.3-V supply rail. This driver will deliver a minimum differential output voltage magnitude of 247 mV into a 100-Ω load when enabled.

The intended application of this device and signaling technique is both point-to-point and multidrop (one driver and multiple receivers) data transmission over controlled impedance media of approximately 100 Ω. The transmission media may be printed-circuit board traces, backplanes, or cables. The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the environment.

The SN65LVDS31 is characterized for operation from –55°C to 125°C.

Datasheet

sn65lvds31-datasheet.pdf
Format PDFSize 261 KBLanguage EN
Third-party / unverified source

SN65LVDS31-EP features

  • Meet or Exceed the Requirements of ANSITIA/EIA-644 Standard
  • Low-Voltage Differential Signaling With Typical
  • Output Voltage of 350 mV and 100-Ω Load
  • Typical Output Voltage Rise and Fall Times of 500 ps (400 Mbps)
  • Typical Propagation Delay Times of 1.7 ns
  • Operate From a Single 3.3-V Supply
  • Power Dissipation 25 mW Typical Per Driver at 200MHz
  • Driver at High Impedance When Disabled or With VCC = 0
  • Bus-Terminal ESD Protection Exceeds 8 kV
  • Low-Voltage TTL (LVTTL) Logic Input Levels
  • Pin Compatible With AM26LS31, MC3487, and μA9638
  • Cold Sparing for Space and High Reliability Applications Requiring Redundancy

SN65LVDS31-EP pinout

SN65LVDS31-EP pinout diagram

SN65LVDS31-EP applications

  • Controlled Baseline
  • One Assembly/Test Site
  • One Fabrication Site
  • Available in Military (–55°C/125°C) 500 ps (400 Mbps) Temperature Range
  • Extended Product Life Cycle
  • Extended Product-Change Notification
  • Product Traceability

SN65LVDS31-EP datasheet PDF preview

PDF · 261 KB

Comments 0

Leave a comment