STM32F103C8T6 / STM32F103 ARM Cortex-M3 Minimum System Development Board
Series STM32
STM32F103C8T6 overview
STM32F103C8T6 or STM32F103 is an ARM-based STM32 Cortex-M3 Minimum System Development Board In Pakistan devices use the Cortex-M3 core, with a maximum CPU speed of 72 MHz. The portfolio covers from 16 Kbytes to 1 Mbyte of Flash with motor control peripherals, USB full-speed interface, and CAN Microcontrollers/STM32 32-bit Arm Cortex MCUs/STM32 Mainstream MCUs/STM32F1 Series. This is STM32F103C8T6 Minimum System Board STM32 ARM Core Module. This board is a low-cost Minimum System Development Board for ARM Microcontroller STM32F103C8T6. Board is suitable for learners that want to learn STM32 microcontroller with ARM Cortex-M3 32-bit core.
Key specifications
flash memory
64K
SRAM
20K
Power I/O
2.0-3.6V
Crystal
4-16MHz
Datasheet
stm32f103c8t6-arm-stm32-minimum-system-development-board.pdf
Format PDFSize 318 KBLanguage EN
Third-party / unverified source
STM32F103C8T6 features
- 100% Brand new and high-quality STM32 Board
- 72MHz work frequency
- Reset (POR/PDR)
- Onboard Mini USB interface, you can give the board power supply and USB communication
STM32F103C8T6 pinout
| Name | Description |
|---|---|
| 3.3V, 5V, GND | 3.3V – Regulated output voltage from the onboard regulator (drawing current is not recommended), can also be used to supply the chip.5V from USB or onboard regulator can be used to supply the onboard 3.3V regulator.GND – Ground pins |
| PA0 – PA7PB0 – PB1 | Pins act as ADCs with 12-bit resolution |
| PA0 – PA15PB0 – PB15PC13 – PC15 | 37 General-purpose I/O pins. |
| TX1, RX1TX2, RX2TX3, RX3 | UART with RTS and CTS pins |
| PA0 – PA15PB0 – PB15PC13 – PC15 | All digital pins have interrupt capability |
| PA0 – PA3PA6 – PA10PB0 - PB1PB6 – PB9 | 15 PWM pins total |
| MISO0, MOSI0, SCK0, CS0MISO1, MOSI1, SCK1, CS0 | 2 SPI |
| PC13 | LED to act as a general-purpose GPIO indicator |
| SCL1, SDA1SCL2, SDA2 | Inter-Integrated Circuit communication ports |
| CAN0TX, CAN0RX | CAN bus ports |
More about STM32F103C8T6
Pinout of STM32F103 Development Board
| Category | Pin Name | Pin Description |
|---|---|---|
| Analog Pins | PA0 – PA7PB0 – PB1 | Pins act as ADCs with 12-bit resolution |
| Input/output pins | PA0 – PA15PB0 – PB15PC13 – PC15 | 37 General-purpose I/O pins. |
| Serial | TX1, RX1TX2, RX2TX3, RX3 | UART with RTS and CTS pins |
| External interrupts | PA0 – PA15PB0 – PB15PC13 – PC15 | All digital pins have interrupt capability |
| Inbuilt LED | PC13 | LED to act as a general-purpose GPIO indicator |
| I2C | SCL1, SDA1SCL2, SDA2 | Inter-Integrated Circuit communication ports |
Comments 0
Leave a comment