The SY8088 is a High Efficiency 1.5MHz, 1A High Efficiency 1.5MHz, 1A made by Silergy, supplied in an SOT23-5 Type package. The absolute maximum ratings table on this page lists the 6 limits from the manufacturer's datasheet that must not be exceeded. This page brings together the SY8088 pinout and maximum ratings, with the full datasheet PDF to preview below or download.
SY8088 is a high efficiency 1.5MHz synchronous step down DC/DC regulator IC capable of delivering up to 1A output current. It can operate over a wide input voltage range from 2.5V to 5.5V and integrate main switch and synchronous switch with very low RDS (ON) to minimize the conduction loss.
Low RDS(ON) for internal switches (top/bottom) 260mΩ/170mΩ
2.5~5.5V input voltage range
40µA typical quiescent current
High light load efficiency
High switching frequency 1.5MHz minimizes the external components
Internal soft-start limits the inrush current
100% dropout operation
RoHS Compliant and Halogen Free
Compact package: SOT23-5
SY8088 pinout
Pin
Name
Description
1
EN
Enable control. Pull high to turn on. Do not float.
2
GND
Ground pin.
3
LX
Inductor pin. Connect this pin to the switching node of the inductor.
4
IN
Input pin. Decouple this pin to the GND pin with at least 4.7uF ceramic capacitor.
5
FB
Output Feedback Pin. Connect this pin to the center point of the output resistor divider (as shown in Figure 1) to program the output voltage: VOUT=0.6*(1+R1/R2).Add optional C1 (10pF~47pF) to speed up the transient response.
Comments 0
Leave a comment