Skip to content
Trademarks and datasheets are the property of their respective owners

TMC2011AN2C1 Datasheet – Variable-Length Shift Register

Published Updated 8 views
Package DIP 24 Pin
TMC2011AN2C1-Pinout

TMC2011AN2C1 overview

The TMC2011AN2C1 is a Variable-Length Shift Register made by Fairchild Semiconductor, supplied in a DIP 24 Pin package. The absolute maximum ratings table on this page lists the 9 limits from the manufacturer's datasheet that must not be exceeded. This page brings together the TMC2011AN2C1 pinout and maximum ratings, with the full datasheet PDF to preview below or download.

The TMC2011A and TMC2111A are high-speed, byte-wide shift registers with programmable delay lengths. The TMC2011A can be programmed to any length between 3 and 18 stages. It offers a special split-word mode which allows for mixed delay lengths. The TMC2011A, con- structed in low-power CMOS, is pin and function compatible with the bipolar TDC1011. The TMC2111A is a byte-wide shift register that can be programmed to lengths of 1 to 16 stages.

The TMC2011A and TMC2111A are fully synchronous, with all operations controlled by a single master clock. Input and output registers are positive-edge triggered D-type flip- flops. The length and mode controls are also registered. Both devices operate with a maximum clock rate of 40 MHz. Fabricated in a submicron CMOS process, the TMC2011A and TMC2111A are TTL-compatible, and are available in 24-pin CERDIP and Plastic DIP packages as well as a

Datasheet

tmc2011a-datasheet.pdf
Format PDFSize 70 KBLanguage ENRevision Rev. 1.1
Third-party / unverified source

TMC2011AN2C1 features

  • Low power CMOS
  • TMC2011A is a pin compatible replacement for the TDC1011 and TMC2011
  • TMC2211A is a pin compatible replacement for the TMC2111
  • Inputs and outputs are TTL compatible
  • DC–40MHz clock rate
  • Selectable delay lengths (TMC2011A: 3 to 18 stages, TMC2111A: 1 to 16 stages)
  • Special 4-bit wide mixed-delay mode (TMC2011A)
  • Available in 24-pin CERDIP and plastic DIP and 28-lead Plastic Leadless Chip Carrier

TMC2011AN2C1 pinout

TMC2011AN2C1 pinout diagram
PinNameDescription
PLCCDIP
Power
7VDD8
18GND21,22
Data Inputs
12,11,10, 9,4,3,2,1DI7-014,13,12, 10,5,4,3,2
Data Outputs
13,14,15, 16,21,22, 23,24DO7-015,16,17, 18,26,27, 28,1
Controls
8CLK9
19,20,6,5L3-023,24,7,6
17MC20

Absolute maximum ratings

ParameterValueUnit
Supply VoltageMin -0.5 / Max 7.0V
Input VoltageMin -0.5 / Max VDD + 0.5V
Output, Applied Voltage2Min -0.5 / Max VDD + 0.5V
Output, Externally Forced Current3,4Min -3.0 / Max 6.0mA
Output, Short Circuit Duration (single output in HIGH state to ground)Max 1sec
Operating, Ambient TemperatureMin -20 / Max 110°C
Junction TemperatureMax 140°C
Storage TemperatureMin -65 / Max 150°C
Lead Soldering (10 seconds)Max 300°C

TMC2011AN2C1 applications

  • Video filtering
  • High speed data registers
  • Local storage registers
  • Digital delay lines
  • Television special effects
  • Pipeline register

TMC2011AN2C1 datasheet PDF preview

PDF · 70 KB

Comments 0

Leave a comment