5V Raspberry Pi Fan Pi4 Fan
5V Raspberry Pi Fan Pi4 Fan overview
5V Raspberry Pi Fan keeps Raspberry Pi computers truly cool with a dedicated 5V, 3.3mm square fan. This Raspberry Pi Fan is ideal when you’re running it near 100% load all the time. Mounts to our Raspberry Pi S.A.F.E. (for B+ and V2) top plate (4-40 x 5/8″ bolts & nuts not included). We’ve successfully used the onboard expansion port header to power our fan installations. Lift the retainer tab on the ground (black lead) and pull it out, and plug the connector (with the remaining red wire) into the corner-most pin. The ground pin can be then mounted to the pin 2 spaces down from it to give you a solid 5V for the fan.
Key specifications
Brushless-sleeved DC motor
6000RPM
blade fan
9
Current
0.2 A
lifetime
35,000-hour
Operating voltage
5V
Fan weight
6.2g / 0.22oz
Datasheet
case-fan-product-brief.pdf
Format PDFSize 483 KBLanguage EN
Third-party / unverified source
5V Raspberry Pi Fan Pi4 Fan features
- Fits perfectly into the lid of the Raspberry Pi 4 Case
- Temperature-controlled fan delivers up to 1.4 CFM of air flow over the
- 18 mm × 18 mm × 10 mm heatsink with self-adhesive pad improves heat
More about 5V Raspberry Pi Fan Pi4 Fan
Features of 5V Raspberry Pi Fan Pi4 Fan
- Brushless DC fan
- Fan dimensions: 30mm x 30mm x 8mm
- Mounting screws & nuts included
- Can be powered by mushing the connector onto the 5V/GND pins of the Pi expansion port.
Comments 0
Leave a comment