Arduino MKR WAN 1310 LoRA Developer Board
Arduino MKR WAN 1310 overview
The Arduino MKR WAN 1310 is a LoRA Developer Board. Main ratings: Microcontroller SAMD21 Cortex®-M0+ 32bit low power ARM MCU; Radio module CMWX1ZZABZ; Board power supply 5V; Secure element ATECC508. This page brings together the Arduino MKR WAN 1310 key specifications, with the full datasheet PDF to preview below or download.
The Arduino MKR WAN 1310 board provides a practical and cost-effective solution to add LoRa® connectivity to projects requiring low power. The heart of the module is the popular Arm® Cortex®-M0 32-bit SAMD21 processor, it also features the powerful Murata CMWX1ZZABZ module and the ECC508 crypto-chip for security.
The Arduino MKR WAN 1310 brings in a series of improvements when compared to its predecessor, the MKR 1300. While still based on the Microchip® SAMD21 low-power processor, the Murata CMWX1ZZABZ LoRa® module, and the MKR family’s characteristic crypto chip (the ECC508), the MKR WAN 1310 includes a new battery charger, a 2MByte SPI Flash, and improved control of the board’s power consumption.
Key specifications
Datasheet
Arduino MKR WAN 1310 features
- Cryptographic co-processor with secure hardware-based key storage
- Protected storage for up to 16 keys, certificates, or data
- ARM Cortex M0+ at up to 48 MHz
- 256KB Flash
- 32KB SRAM
- Power On Reset POR and Brown Out Detection
- (BOD)
- ECDH: FIPS SP800-56A Elliptic Curve Diffie-Hellman
- ECDSA: FIPS186-3 Elliptic Curve Digital Signature Algorithm
- NIST standard P256 elliptic curve support
- SHA-256 & HMAC hash including off-chip context save/restore
- 92% Charge Efficiency at 2 A, 90% at 4 A
- Autonomous Battery Charging
Arduino MKR WAN 1310 specifications
| Microcontroller | SAMD21 Cortex®-M0+ 32bit low power ARM MCU |
|---|---|
| Radio module | CMWX1ZZABZ |
| Board power supply (USB/VIN) | 5V |
| Secure element | ATECC508 |
| Supported batteries | rechargeable Li-Ion, or Li-Po, 1024 mAh minimum capacity |
| Circuit operating voltage | 3.3V |
| Digital I/O pins | 8 |
| PWM pins | 13 (0 .. 8, 10, 12, 18 / A3, 19 / A4) |
| UART | 1 |
| SPI | 1 |
| I2C | 1 |
| Analog input pins | 7 (ADC 8/10/12 bit) |
| Analog output pins | 1 (DAC 10 bit) |
| External interrupts | 8 (0, 1, 4, 5, 6, 7, 8, 16 / A1, 17 / A2) |
| DC current per i/o pin | 7 mA |
| CPU flash memory | 256 KB (internal) |
| QSPI flash memory | 2MByte (external) |
| SRAM | 32 KB |
| Clock speed | 32.768 kHz (RTC), 48 MHz |
| LED_builtin | 6 |
| USB | Full-Speed USB Device and embedded Host |
| Antenna gain | 2dB (bundled pentaband antenna) |
| Carrier frequency | 433/868/915 MHz |
| Working region | EU/US (confirmed) |
| Length | 67.64 mm |
| Width | 25 mm |
| Weight | 32 gr. |
Arduino MKR WAN 1310 applications
- Traffic Light Count Down Timer
- Parking Lot Counter
- Embedded systems
- Home Automation
- Industrial Automation
- Medical Instrument
Comments 0
Leave a comment