Skip to content

ESP01 ESP 01 ESP8266 Wi-Fi Module

ESP8266
Published Updated 29 views Report an error
Package QFN-32 Series ESP8266

ESP8266 overview

The ESP 01 or ESP8266 WiFi Module is a self-contained SOC. ESP8266 serial module has an integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. The esp8266 wifi module Arduino is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor. Each ESP8266 module comes pre-programmed with an AT command set firmware, meaning, you can simply hook this up to your Arduino device and get about as much WiFi-ability as a WiFi Shield offers (and that’s just out of the box)! The esp 01 connect to wifi module is an extremely cost-effective board with a huge, and ever-growing, community.

Key specifications

Operating Voltage
2.5 V ~ 3.6 V
Operating Current Average value
80 mA
Operating Temperature Range
–40 °C ~ 125 °C

Datasheet

0a-esp8266ex-datasheet-en-1.pdf
Format PDFSize 1.3 MBLanguage EN
Third-party / unverified source

ESP8266 features

  • Wi-Fi Direct (P2P), soft-AP
  • Integrated TCP/IP protocol stack
  • Integrated TR switch, balun, LNA, power amplifier, and matching network
  • Integrated PLLs, regulators, DCXO, and power management units
  • +19.5dBm output power in 802.11b mode
  • Power down leakage current of <10uA
  • 1MB Flash Memory
  • An integrated low-power 32-bit CPU could be used as an application processor
  • SDIO 1.1 / 2.0, SPI, UART
  • STBC, 1×1 MIMO, 2×1 MIMO
  • A-MPDU & A-MSDU aggregation & 0.4ms guard interval
  • Wake up and transmit packets in < 2ms
  • Standby power consumption of < 1.0mW (DTIM3)

ESP8266 datasheet PDF preview

PDF · 1.3 MB

Comments 0

Leave a comment