Arduino Nano 33 IoT Developer Board
Arduino Nano 33 overview
The Arduino Nano 33 is an IoT Developer Board. Main ratings: Microcontroller SAMD21 Cortex®-M0+ 32bit low power ARM MCU; Radio Module u-blox NINA-W102; Secure Element ATECC608A; Operating Voltage 3.3V. This page brings together the Arduino Nano 33 pinout and key specifications, with the full datasheet PDF to preview below or download.
Arduino Nano 33 BLE is an optimum point of start for any beginner, maker or professional to get started with Bluetooth® Low Energy enabled projects. The board's main processor is a low power Arm® Cortex®-M0 32-bit SAMD21. The WiFi and Bluetooth® connectivity is performed with a module from u-blox, the NINA-W10, a low power chipset operating in the 2.4GHz range. Also, Secure communication is ensured through the use of a Microchip® ECC608 crypto chip.
Arduino Nano 33 is built upon the nRF52840 microcontroller and runs on Arm® Mbed™ OS. The Nano 33 BLE not only features the possibility to connect via BLE but also comes equipped with a 9 axis IMU making it suitable for wearable projects.
Key specifications
Datasheet
Arduino Nano 33 features
- SAMD21G18A
- Processor
- 256KB Flash
- 32KB Flash
- Power On Reset (POR) and Brown Out Detection (BOD)
- Peripherals
- 12 channel DMA
- 12 channel event system
- 5x 16 bit Timer/Counter
- 3x 24 bit timer/counter with extended functions
- 32 bit RTC Watchdog Time CRC-32 generator
- Full speed Host/Device USB with 8 end points
- 6x SERCOM (USART, I2C, SPI, LIN) Two channel I2S
- 12 bit 350ksps ADC (up to 16 bit with oversampling)
- 10 bit 350ksps DAC
- External Interrupt Controller (up to 16 lines)
- Nina W102
- Module
- Dual Core Tensilica LX6 CPU at up to 240MHz
- 448 KB ROM, 520KB SRAM, 2MB Flash
- WiFi
- IEEE 802.11b up to 11Mbit IEEE 802.11g up to 54MBit IEEE 802.11n up to 72MBit
- 2.4 GHz, 13 channels
- -96 dBm sensitivity
- Bluetooth® BR/EDR
- Max 7 peripherals
- 2.4 GHz, 79 channels
- Up to 3 Mbit/s
- 8 dBm output power at 2/3 Mbit/s
- 11 dBm EIRP at 2/3 Mbit/s
- -88 dBm sensitivity
- Bluetooth® Low Energy
- Bluetooth® 4.2 dual mode
- 2.4GHz 40 channels
- 6 dBm output power
- 9 dBm EIRP
- Up to 1 Mbit/
- MPM3610 (DC-DC)
- Regulates input voltage from up to 21V with a minimum of 65% efficiency at minimum load
Arduino Nano 33 pinout
| Pin | Description |
|---|---|
| 1 | D13 |
| 2 | +3V3 |
| 3 | AREF |
| 4 | A0/DAC0 |
| 5 | A1 |
| 6 | A2 |
| 7 | A3 |
| 8 | A4/SDA |
| 9 | A5/SCL |
| 10 | A6 |
| 11 | A7 |
| 12 | VUSB/+5V |
| 13 | RST |
| 14 | GND |
| 15 | VIN |
| 16 | TX |
| 17 | RX |
| 18 | RST |
| 19 | GND |
| 20 | D2 |
| 21 | D3/PWM |
| 22 | D4 |
| 23 | D5/PWM |
| 24 | D6/PWM |
Show all 30 pins
| Pin | Description |
|---|---|
| 25 | D7 |
| 26 | D8 |
| 27 | D9/PWM |
| 28 | D10/PWM |
| 29 | D11/MOSI |
| 30 | D12/MISO |
Arduino Nano 33 specifications
| Microcontroller | SAMD21 Cortex®-M0+ 32bit low power ARM MCU |
|---|---|
| Radio Module | u-blox NINA-W102 |
| Secure Element | ATECC608A |
| Operating Voltage | 3.3V |
| Input Voltage (limit) | 21V |
| DC current per i/o pin | 7 mA |
| Clock Speed | 48MHz |
| CPU flash memory | 256KB |
| SRAM | 32KB |
| EEPROM | none |
| digital input / output pins | 14 |
| PWM pins | 11 (2, 3, 5, 6, 9, 10, 11, 12, 16 / A2, 17 / A3, 19 / A5) |
| UART | 1 |
| SPI | 1 |
| i2c | 1 |
| analog input pins | 8 (ADC 8/10/12 bit) |
| analog output pins | 1 (DAC 10 bit) |
| led_builtin | 13 |
| usb | Native in the SAMD21 Processor |
| IMU | LSM6DS3 |
| length | 45 mm |
| width | 18 mm |
| weight | 5 gr (with headers) |
Arduino Nano 33 applications
- Parking Lot Counter
- Embedded systems
- Home Automation
- Industrial Automation
- Medical Instrument
Comments 0
Leave a comment